Failure modes and effect analysis (FMEA)
Contents |
[edit] What is FMEA and when is it used?
FMEA is a step by step approach for collecting knowledge about possible points of failure in a design, manufacturing or construction process, product or service:
- When a process, product or service is being designed or redesigned
- When an existing process, product or service is being applied in a new way
- Before developing control plans for a new or modified process
- When improvement goals are planned for an existing process, product or service
- When analysing failures of an existing process, product or service
- Periodically throughout the life of the process, product or service.
[American Society for Quality (ASQ) 2017]
[edit] History of FMEA
FMEA was first used by the US navy in 1949 to understand and control the risks in their procedures, including operation of weapon systems. It was also used in the 1960’s for the Apollo missions and then from the 1970’s by the automotive industry.
[edit] Use of FMEA in the project Lifecycle
It can be used by project teams to assess and control how a process or item can fail for example:
- Design – to check the feasibility of design prior to build
- Material – to ensure correct selection of material prior to build
- Construction – to understand risks in assembly prior to build
- Commissioning – to understand potential operational failures prior to use
- Changes to Plan – the potential risks resulting from having to change a process or an item
[edit] Benefits
- Captures collective knowledge of team
- Improves quality, reliability and safety of the process
- Logical structured process identifying areas of concern
- Reduces development time and cost
- Quality led activity
[edit] Steps to undertake the FMEA
[edit] Setup
Preparation for Workshop |
Assembling the Team
|
Creating FMEA Template
|
[edit] Consider potential failures (for each critical item / process list the potential points of failure)
Failure Mode |
Effect of failure
| ||||||
Cause of failure
|
Current controls |
[edit] Assessment of failure
Occurrence (OCC)
|
Severity (SEV) |
Detection (DET) |
Risk Priority Number (RPN)
|
[edit] Actions to be taken
|
Revised Assessment
|
Post FMEA
|
[edit] Related Tools
- DFMEA – procedure used in engineering to explore the possibility of a design failing in a real world situation.
- PFMEA – procedure which focuses on the failures of a process
- FMECA – extension to FMEA which introduces an additional metric called criticality.
This article was originally written by Alan Grogan on behalf of the CQI Construction Special Interest Group, reviewed by members of the Competency Working Group and approved for publication by the Steering Committee on 1 May 2019.
--ConSIG CWG 20:27, 26 May 2019 (BST)
[edit] Related articles on Designing Buildings
- Annex SL.
- Change control: a quality perspective.
- Cracking and building movement.
- Defects.
- Design Failure Mode and Effects Analysis.
- Failure.
- How to write an inspection and test plan.
- Inspection and test plan.
- Latent defects.
- Lifts and escalators: a quality perspective.
- Mobilisation to site: a quality perspective.
- Patent defects.
- Quality tools: fishbone diagram.
- Smarter systems predicting failure.
- Structural steelwork: a quality perspective.
- Why should quality be important to the construction industry?
Featured articles and news
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.